Bedec
Aqua-Advanced Satin Black (Ready Mixed) 2.5L

BN040310J
Quick drying, low odour, micro porous, slip resistant finish for interior use on concrete and wood.
Aqua-Advanced Satin Black (Ready Mixed)
Share...

In detail

Bedec Aqua-Advanced Satin is a low VOC content satin finish. A washable product which is thinned with water and is applied by brush, roller or spray and is suitable for interior and exterior use. 

Touch dry in 30 minutes and recoatable after 4 hours. Water based satin is a tough, durable mid sheen finish for wood and metal, which is non-yellowing and provides good resistance to knocking and scuffing.

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

Size
2.5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 15sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
Up to 1 hour 
Recoatable
1-4 hours 
Suitable for...
Interior and exterior use 
Scrubbability
Washable 
Colour
Black 
Colour type
Ready mixed 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash.

Smooth glossy surfaces should be lightly abraded to provide a key.

Application

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.

On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

Clearing Up

Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.