Barn Paint Semi Gloss (Ready Mixed) 20L

£253.08 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Durable and tough product which is also a flexible micro-porous protective coating, with excellent colour retention.
Barn Paint Semi Gloss (Ready Mixed)

In detail

Bedec Barn Paint can be applied to previously painted surfaces, even those coated with tar varnish, weathered bitumen or creosote, provided there are no loose powdery deposits. Durable and tough product which is also a flexible micro-porous protective coating, with excellent colour retention.

Two or three coats of this product can be applied in one day, especially in the summer months. Bedec Barn Paint is suitable for a variety of tasks and recommended for use on: fences, gates, cladding (wood, metal and cement fibre), farm equipment, tanks, gutters, drainpipes and many more. This product is also suitable for weathered substrates such as galvanising and plastisol cladding.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 15sq/m per litre 
VOC level
Touch dry
1-4 hours 
1-4 hours 
Suitable for...
Exterior use 
Battleship Grey 
Colour type
Ready Mixed 
Water & Detergent 

* Colours on screen may vary from actual paint

Available colours

Bedec Barn Paint Semi Gloss (Ready Mixed) is available in 14 colours from the Bedec Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Surface Preparation

    Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal, mould and fungal growths should be removed and treated with a fungicidal wash.

    Smooth glossy surfaces should be lightly abraded to provide a key.

    On untreated weathered wood, new wood, cement, render, plaster, brick work or any porous substrate. The first coat should be thinned with 30% clean water.


    Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.

    On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

    Clearing Up

    Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.