Bedec
Extra-Flex Smooth Masonry Brilliant White 5L

BN041705F
Flexible, microporous, quick drying, matt finish for a long lasting smooth finish for exterior masonry.
Extra-Flex Smooth Masonry Brilliant White
Share...

In detail

Bedec Extra-Flex Masonry is ideal for the protection of exterior masonry, can be used on: roughcast, pebble-dash, brickwork, cement and concrete rendered surfaces. Suitable for application on previously painted surfaces after suitable preparation. 

Acrylic blend is a flexible micro-porous protective coating, this will flex with the substrate where movement occurs. Touch dry in 2 hours and recoatable after 4 hours.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 10sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Exterior use 
Scrubbability
Washable 
Colour
Brilliant White 
Colour type
White 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash.

Untreated render, plaster, brickwork or any porous substrate should be thinned with approximately 30% clean water.

Application

After the cracks have been treated two or three coats of Extra Flex should then be applied over the complete area.

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 10°C or when likely to be foggy or rain before the paint has fully dried.

On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not overspread.

Clearing Up

Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.