Acrylic Primer Undercoat Grey 2.5L
In detail
Blackfriars Acrylic Primer Undercoat is a low VOC content finish. A product which is thinned with water and is applied by brush, roller or spray.
- Size
- 2.5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 14sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Colour
- Grey
- Cleanup
- Water & Detergent
- Base
- Water
* Colours on screen may vary from actual paint
Available colours
Blackfriar Acrylic Primer Undercoat Grey is available in 1 colours from the Blackfriar Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Health and Safety Data Sheet
The Health and safety data sheet for Acrylic Primer Undercoat Grey 2.5LAdditional information
Surface Preparation
Ensure the surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Treat knots and resinous areas with Blackfriar Patent Knotting and allow to dry before application. Exposed ferrous metal should be spot primed with the appropriate primer.
Application
- Stir thoroughly prior to use with a broad stirrer.
- Can be applied by brush, roller or spray.
- Two coats are recommended to give best protection.
- On open end grain timber brush in well and apply two coats.
- For porous surfaces or if applying by spray the product may be thinned up to 10% with water.
Clean Up
Remove as much product as possible from the application equipment before washing with water.
Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.