Excellent obliteration, for interior and exterior use. For wood, metal, plaster and all normal surfaces.
Touch dry in 2-4 hours and recoatable after 16 hours.
- Application Methods
- Up to 14sq/m per litre
- VOC level
- Not Recommended
- Touch dry
- 1-4 hours
- 12-24 hours
- Colour type
- Ready mixed
- Brush cleaner or White spirit
* Colours on screen may vary from actual paint
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be abraded and degreased prior to application of Blackfriar Undercoat. Remove any rust and abrade back to a clean bright surface before priming with Blackfriar Anti-Rust Primer. New or other bare surfaces should be primed with the appropriate Blackfriar primer followed by a coat of Blackfriar Undercoat.
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray.
Do not use under cold (less than 5°C), damp or humid conditions. Ensure knots are sealed with Blackfriar Patent Knotting Solution.
Up to 14m² per litre per coat.
Touch dry in 2 - 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.