High Gloss Paint Black (Ready Mixed) 500ML
Product Code: BN0606510Q
High Gloss Paint Black (Ready Mixed) 500ML
Product Code: BN0606510Q
Hard wearing, high opacity, gloss finish for interior and exterior use on woodwork and metalwork
Trade customer? - log in to get your prices
£13.99
Inc VAT
£11.66
Exc VAT
Blackfriar High Gloss Paint is specially formulated to provide a hard-wearing finish with increased flexibility meaning it lasts longer than ordinary gloss paints.
Ideal for wood, metal, plaster and most paintable interior and exterior surfaces. Blackfriar High Gloss Paint is a high VOC content gloss finish.
- Size
- 500ML
- Barcode
- 5013296630238
- Application Methods
- Brush
- Coverage
- Up to 14sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 4-6 hours
- Recoatable
- 16-36 hours
- Scrubbability
- Washable
- Colour
- Black
- Colour type
- Ready mixed
- Finish
- Gloss
- Cleanup
- Brush cleaner or White spirit
- Base
- Oil
Data Sheets
-
Health and Safety Data Sheet The Health and Safety data sheet for High Gloss Paint Black (Ready Mixed) 500ML
-
Product Data Sheet The Product data sheet for High Gloss Paint Black (Ready Mixed) 500ML
Additional Information
Preparation
Ensure the surface to be painted is clean, dry, and free from any rust, oils, wax or any other surface contamination. Remove any loose or flaking paint back to a firm edge, abrade any existing coating to provide a key. Rusty metals should be wire-brushed to a clean bright surface and primed immediately with Blackfriar Quick Drying Anti-Rust Primer. Galvanized metal should be degreased and primed with Blackfriar Multi-Surface Primer. New and bare surfaces should be primed with an appropriate primer such as Blackfriar Multi-Surface Primer.
Application
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. Two coats are recommended to give best protection.
Thinning
Not recommended.
Limitations
Do not use under cold (less than 5°C), damp or humid conditions. Blackfriar High Gloss Paint is not resistant to petrol or fuel oil (use Blackfriar Quick Drying Metal Paint). Not suitable for direct application to galvanised metal, use Blackfriar Multi Surface Primer first.
Coverage
Up to 14m² per litre per coat.
Drying Time
Touch dry in 4-6 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Clean Up
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Storage
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.