Coo-Var
Line Marking Aerosol Green 750ML

BN101315P
£23.10 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:


Sorry - this product cannot be delivered
Fast drying, for use on many surfaces, suitable for indoor and outdoor use. It is available in six colours
Line Marking Aerosol Green
Share...

In detail

Coo-Var Line Marking Aerosol Paint is fast drying. Perfect for use on areas where speed and efficiency are important such as car parks, tennis courts, building sites, factories and schools. 

Suitable for both indoor and outdoor use. Touch dry in up to 1 hour and recoatable after 1-4 hours.

Size
750ML 
Application Methods
Aerosol
VOC level
High 
Touch dry
Up to 1 hour 
Recoatable
1-4 hours 
Suitable for...
Interior and exterior use 
Scrubbability
Washable 
Colour
Green 
Colour type
Ready mixed 
Finish
Satin 
Base
Oil 
Age restriction
You must be 16 years or older to buy this product. 

* Colours on screen may vary from actual paint

Available colours

Coo-Var Line Marking Aerosol Green is available in 1 colours from the Coo-Var Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Coo-Var Line Marking Paint is an easy to use, quick drying paint formulated for line marking a wide range of surfaces including concrete, tarmac, bitumen, asphalt, wood, gravel and grass.

    Uses include line marking of car parks, warehouse floors, sports fields, playgrounds and factories. Also ideal for us when survey marking. It has a quick drying and hard wearing formula.

    Preparation

    Ensure surfaces are dry and free from dust and grease. Polished or highly smooth surfaces should be roughened first.

    Application

    • Shake can vigorously for two minutes.
    • Turn can upside down, fit into applicator if used, then pull nozzle to activate aerosol.
    • The closer the aerosol to the surface being marked, the narrower and more accurate the lines. Use masking tape to create sharp lines. The speed of movement controls the density of the marked line.
    • After use, turn the aerosol upright and spray for a few seconds to clear nozzle.

    Properties

    Drying time: Touch dry in 15-30 minutes, hard dry 2 hours and fully cured in 24 hours

    Overcoat time: 2 hours

    Coverage guide: 60-100 meters of continuous line per can depending on the width of the line

    Storage: It is advisable to store these aerosols on their sides in order to prevent blocking.