Radiator Enamel Satin White 400ML
Sorry - this product cannot be delivered
In detail
- Size
- 400ML
- Application Methods
- Aerosol
- VOC level
- High
- Touch dry
- Up to 1 hour
- Recoatable
- Up to 1 hour
- Suitable for...
- Interior use
- Colour
- White
- Colour type
- White
- Finish
- Satin
- Base
- Oil
- Age restriction
- You must be 16 years or older to buy this product.
* Colours on screen may vary from actual paint
Available colours
Hammerite Radiator Enamel Satin White is available in 1 colours from the Hammerite Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Hammerite Radiator Paint is specially formulated to provide a heat resistant, gloss or satin finish on domestic radiators and hot water pipes.
Surface Preparation
All surfaces must be clean, dry and free from rust, flaking paint, dust and grease. Rub down all painted surfaces with abrasive paper. Radiators must be turned off and only painted when cold.
Application
- Stir thoroughly before use.
- Apply 1 or 2 coats. For best results, apply 2 coats. Allow 16 hours between coats.
- After application leave the radiator turned off for a minimum of 12 hours.
- Rooms should be well ventilated for 12 hours after the heating is turned on to help remove all paint odours.
