Isomat
Block Primer White 3L

BN28767005H
FREE next working day delivery available
£51.80 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Water-based, stain blocking high-adhesion primer suitable for interior and exterior use.
Block Primer White
Share...

In detail

Isomat Block Primer is an acrylic, white, water-based primer. It offers high adhesion and coverage, and blocks water-soluble stains on the substrate, so that they do not appear on the final colour. It is odourless, as well as environmentally and user friendly, thus recommended for use in interior, inhabited spaces.

Suitable for indoor and outdoor use, on surfaces to be covered with emulsion or acrylic paints and substrates polluted with smoke, nicotine, exhaust fumes, water soluble markers, pencil stains etc. It prevents the appearance of water-soluble stains on the
final colour.

Size
3L 
Application Methods
Airless Spray, Brush, Roller
Coverage
Up to 16sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior and exterior use 
Colour
White 
Colour type
White 
Cleanup
Water & Detergent 

* Colours on screen may vary from actual paint

Additional information

PROPERTIES:

Acrylic, water-based primer that blocks water-soluble stains on the substrate, so that they do not appear on the final color. Suitable for indoor and outdoor use, on surfaces to be covered with emulsion or acrylic paint, as well as substrates stained with smoke, nicotine, exhaust fumes, water-soluble markers, pencil stains etc. It is odorless, as well as environmentally and user friendly.

DIRECTIONS FOR USE:

  • The substrate must be dry and free of dust, grease, dirt etc., while any imperfections must be restored. BLOCK PRIMER is applied in one or two layers, depending on how stained the surface is.
  • The surface may be recoated after 2.5 hours, but it is recommended to apply the emulsion or acrylic, water-based paint after 24 hours, for higher effectiveness of the stain blocker.
  • Temperature during the application should be between +10°C and +35°C.

CLEANING OF TOOLS:

Remove as much of the product (remaining on the tools) as possible, before cleaning them. Clean the tools with water and detergent, immediately after use