Hard Hat Topcoat High-Gloss 2143 RAL1018 Light Yellow 500ML
Sorry - this product cannot be delivered
In detail
Industrial paint aerosols, for bare metal, wood and concrete. To be applied over Hard Hat 2169/2182 primers or properly prepared painted substrates.
Hard Hat is intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications.
- Size
- 500ML
- Application Methods
- Aerosol
- Coverage
- Up to 10sq/m per litre
- VOC level
- High
- Touch dry
- Up to 1 hour
- Recoatable
- Over 24 hours
- Colour
- 2143 RAL1018 Light Yellow
- Colour type
- Ready mixed
- Finish
- Gloss
- Age restriction
- You must be 16 years or older to buy this product.
* Colours on screen may vary from actual paint
Available colours
Rustoleum Hard Hat Topcoat High-Gloss 2143 RAL1018 Light Yellow is available in 1 colours from the Rustoleum Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Surface Preparation
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Prime or spot prime with the recommended Rustoleum Primers. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.
Application
- Remove cover cap.
- Shake vigorously for at least one minute after the rattle of mixing ball is heard.
- Shake frequently during use.
- Hold can approx. 25 cm from surface.
- Use back and forth motion keeping can parallel with surface.
- Ensure that can is in motion when spray button is pressed to avoid runs and sags.
- Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
- After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.