Rust-Oleum Industrial
Hard Hat Topcoat Flat 2178 Black 500ML

BN483025Q
£15.00 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Industrial quality topcoats in an aerosol, apply direct to bare steel or over Hard Hat primer.
Hard Hat Topcoat Flat 2178 Black
Share...

In detail

Industrial paint aerosols, for bare metal, wood and concrete. The tough flexible film resists chipping, cracking and peeling and is heat-resistant up to 100°C. 

Hard Hat is intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications. 

To be applied over Hard Hat 2169/2182 primers or properly prepared painted substrates. Touch dry in 15 minutes and recoatable within 1 hour or after 48 hours. 

Size
500ML 
Coverage
Up to 10sq/m per litre 
VOC level
High 
Touch dry
Up to 1 hour 
Recoatable
Over 24 hours 
Colour
2178 Black 
Colour type
Ready mixed 
Finish
Matt 
Age restriction
You must be 16 years or older to buy this product. 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Prime or spot prime with the recommended Rustoleum Primers. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.

Application

  • Remove cover cap.
  • Shake vigorously for at least one minute after the rattle of mixing ball is heard.
  • Shake frequently during use.
  • Hold can approx. 25 cm from surface.
  • Use back and forth motion keeping can parallel with surface.
  • Ensure that can is in motion when spray button is pressed to avoid runs and sags.
  • Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
  • After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.