Rustoleum
Hard Hat Topcoat High-Gloss 2179 RAL9005 Black 500ML

BN483030Q
£19.80 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:


Sorry - this product cannot be delivered
Industrial quality topcoats in an aerosol, apply direct to bare steel or over Hard Hat primer.
Hard Hat Topcoat High-Gloss 2179 RAL9005 Black
Share...

In detail

Industrial paint aerosols, for bare metal, wood and concrete. The tough flexible film resists chipping, cracking and peeling and is heat-resistant up to 100°C. 

To be applied over Hard Hat 2169/2182 primers or properly prepared painted substrates. Hard Hat is intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications. 

Touch dry in 15 minutes and recoatable within 1 hour or after 48 hours. 

Size
500ML 
Application Methods
Aerosol, Brush
Coverage
Up to 10sq/m per litre 
VOC level
High 
Touch dry
Up to 1 hour 
Recoatable
Over 24 hours 
Colour
2179 RAL9005 Black 
Colour type
Ready mixed 
Finish
Gloss 
Base
Oil 
Age restriction
You must be 16 years or older to buy this product. 

* Colours on screen may vary from actual paint

Available colours

Rustoleum Hard Hat Topcoat High-Gloss 2179 RAL9005 Black is available in 1 colours from the Rustoleum Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    RUST-OLEUM® HARD HAT® topcoats are fast drying and ideal for use on substrates such as metal, wood, concrete and masonry. Prepare surface well for best protection. When using fluorescents, a white undercoat is suggested. 2500 Clear increases and prolongs the effect of fluo coatings and protects chrome, aluminium, silver and metallic coatings. Recoat time: < 1 hour or after 48 hours.

    Directions for use

    • Remove contaminations.
    • Shake for 1 minute.
    • After rattle of mixing balls is heard during use.
    • Spraying distance: Approx 25cm.
    • For optimal use if temperature > 0°C and relative humidity < 85%.
    • Apply several thin layers for best coating thickness.
    • Drying time: 15 min.
    • After use turn can upside down and spray to clear valve.