Rustoleum
2100 Hard Hat Topcoat Heat Resistant Black 7778 500ML

BN483510Q
£20.89 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:


Sorry - this product cannot be delivered
Heat-Resistant spray for temperatures up to 750.
2100 Hard Hat Topcoat Heat Resistant Black 7778
Share...

In detail

Industrial paint aerosols, for bare metal, wood and concrete. The tough flexible film resists chipping, cracking and peeling and is heat-resistant up to 100°C. 

Hard Hat is intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications. 

To be applied over Hard Hat 2169/2182 primers or properly prepared painted substrates. Touch dry in 15 minutes and recoatable within 1 hour or after 48 hours. 

Size
500ML 
Coverage
Up to 10sq/m per litre 
VOC level
High 
Touch dry
Up to 1 hour 
Recoatable
Over 24 hours 
Colour
Black 
Colour type
Tinted 
Finish
Gloss 
Age restriction
You must be 16 years or older to buy this product. 

* Colours on screen may vary from actual paint

Available colours

Rustoleum 2100 Hard Hat Topcoat Heat Resistant Black 7778 is available in 1 colours from the Rustoleum Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application.

    Application

    • Remove cover cap.
    • Shake vigorously for at least one minute after the rattle of mixing ball is heard.
    • Shake frequently during use.
    • Hold can approx. 30 cm from surface.
    • Use back and forth motion keeping can parallel with surface.
    • Ensure that can is in motion when spray button is pressed to avoid runs and sags.
    • Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
    • After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.