Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

5200 Epoxyshield Ultra RAL 7035 (Ready Mixed) 5L

Product Code: BN4941010F
Loading ... Expand image

5200 Epoxyshield Ultra RAL 7035 (Ready Mixed) 5L

Product Code: BN4941010F
Trustpilot

Single pack water based floor paint for light traffic areas.

£131.00 Inc VAT £109.17 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£131.00 Inc VAT £109.17 Exc VAT
Rust-Oleum 5200 Epoxyshield Ultra is quick-drying single pack water-based floor coating (epoxy-modified acrylic) for light to medium duty (normal foot traffic/limited vehicular traffic). 

Easy to apply, touch dry after just 2 hours and gives a satin-matt finish. Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre. Touch dry: 2 hours, recoatable 6 hours, safe to walk on 16 hours, park a vehicle: after 7 days.

EpoxyShield 5200 ULTRA can be applied on concrete floors which are completely clean, dry and treated with EpoxyShield Sealer 5220. Application is by brush or roller with coverage up to 9sq/m per litre.
Size
5L
Barcode
8715743015878
Application Methods
Brush, Roller
Coverage
Up to 10sq/m per litre
VOC level
Medium
Thinning
Not required
Touch dry
1-4 hours
Recoatable
4-8 hours
Suitable for...
Interior use
Scrubbability
Washable
Colour
RAL 7035
Colour type
Ready Mixed
Finish
Eggshell
Cleanup
Water & Detergent
Base
Water-Based
Trustpilot

Data Sheets

Additional Information

EpoxyShield® ULTRA (5200-series)

Quick-drying single pack water-based floor coating (epoxy-modified acrylic) for light to medium duty (normal foot traffic/limited vehicular traffic). Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre.

Surface preparation

Only apply to completely clean and dry concrete floors. Do not apply to smooth and completely sealed concrete or concrete containing a curing compound. Remove oil, grease and all other contaminants with EpoxyShield Cleaner/Degreaser 2901. Allow new concrete to set for at least 30 days. Remove laitance, loose and damaged concrete by sandblasting or keying with RUST-OLEUM Surfa-Etch 108. Repair all holes and cracks with EpoxyShield concrete repair products.

Always pre-treat absorbent, porous surfaces with EpoxyShield Sealer 5220. Roughen well-sealed and smooth concrete and treat with Epoxyshield Sealer 5220. Roughen still-intact floor coatings to ensure good adherence. Remove poorly-adhering old coatings with wire brush and sandpaper. During application the surface must be clean and dry.

Application

  • Apply undiluted in at least two coats using a nylon roller or a polyester brush.
  • For the best results use EpoxyShield Sealer 5220 as first coat.
  • Recommended film thickness: 40 pm dry, (100 pm wet). The temperature of the surface must be at least 3°C above the dew point.

Related Products