An ultra-tough, heat-resistant enamel that is specifically formulated for finishing / refinishing the exterior of radiators. Washable and moisture resistant. Prevents rust.

Preparation

Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare metal should be primed with Rust-Oleum Surface Primer. Cap and/or label indicate approximate colour and finish. Cover surrounding areas to protect from spray mist.

Application

• Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use.

• Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke.

• For best results whilst spraying keep the can the same distance from the surface and keep the can in motion.

• Apply several light coats a few minutes apart.

Properties

Cleaning: After use invert can and spray for 2-3 seconds to clear the spray nozzle.

Drying & Recoating: Touch Dry in 1 hour.

Hard Dry: 24 hours.

Recoat: within 1 hour or after 24 hours.

Coverage: This can covers approximately 2sq/m dependent upon surface profile / porosity.

Limitations

Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960's paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask.