Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Garden Shades (Tinted) 2.5L - Alpine Emerald

Product Code: HA1594095J
OFFER
Loading ... Expand image

Garden Shades (Tinted) 2.5L - Alpine Emerald

Product Code: HA1594095J
Trustpilot

Semi-transparent wood treatment for exterior wood. Available in a range of colours.

  • Store stocked line

* Colours on screen may vary from actual paint

SEASONAL SAVINGS
£21.98 Inc VAT £18.32 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
3 working days
£21.98 Inc VAT £18.32 Exc VAT
Cuprinol Garden Shades is a semi-transparent matt finish treatment for exterior wood, specifically sheds and fences. Can be applied to both smooth and rough sawn timber by brush or spray. 

Special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. Cuprinol Garden Shades has longer lasting performance, with 6 years protection compared to the standard 2 years protection. 

For spray application, use of either the Cuprinol Fence Spray or Cuprinol Power Sprayer are recommended. Recoatable in 8 hours with coverage up to 12sq/m per litre on smooth timber and 5sq/m per litre on rough sawn timber.

What is a tinted product?
This means the chosen colour and paint finish has been mixed to order, especially for you.

Size
2.5L
Barcode
5010212637654
Application Methods
Brush, Spray
Coverage
Up to 12sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
4-8 hours
Suitable for...
Exterior use
Scrubbability
Washable
Lifespan
Up to 5 years
Colour type
Tinted
Cleanup
Water & Detergent
Trustpilot

Data Sheets

Additional Information

Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, bringing out beautiful rich colour into the garden.

Preparation

Read the Health, Safety and Environment information opposite. All surfaces should be clean (free from dirt, algae, grease and flaking paint) and dry. Remove any algae, lichen or fungi using an appropriate fungicidal wash or clearner designed for the job.

  • Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application.
  • Untreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay.
  • Previously coated wood: loose, flaking paint should be stripped back to bare wood.

Application by brush

  • Stir thoroughly before and during use.

Application by spray (for wood only)

  • Refer to the Cuprinol sprayer instructions leaflet before use.
  • Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

Minimum of two coats required. Subsequent coats MUST be applied on the same day no longer than 8 hours apart. If not possible, lightly sand down surfaces before recoat to ensure adhesion.