Dulux Trade
Classic Select Woodstain (Tinted) Ebony 97 2.5L

HA173802J
FREE next working day delivery available
£57.98 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Low-build matt finish for exterior softwoods and hardwoods. 4 Year protection.
Classic Select Woodstain (Tinted)
  • Classic Select Woodstain (Tinted)
Share...

In detail

Dulux Trade Classic Select Woodstain is a solvent-based finish for exterior smooth planed wood and rough sawn timber surfaces. Ideal for cladding and fascia boards. 

It penetrates deep into the surface and dries to a low-build matt finish that will not flake, blister or peel. Suitable for both softwoods and hardwoods, it provides 4 protection. 

Application is by brush with coverage up to 14sq/m per litre. Touch dry between 4 -6 hours and recoatable in 16 hours. 

Size
2.5L 
Application Methods
Brush
Coverage
Up to 14sq/m per litre 
VOC level
High 
Thinning
Not recommended 
Touch dry
4-8 hours 
Recoatable
12-24 hours 
Suitable for...
Exterior use 
Scrubbability
Washable 
Finish
Matt 
Cleanup
White spirit or Brush cleaner 
Base
Solvent-Based 

* Colours on screen may vary from actual paint

Available colours

Dulux Trade Classic Select Woodstain (Tinted) is available in 3 colours from the Dulux Trade Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    To get the best results, ensure surfaces to be stained are sound, clean, dry and free from all defective or poorly adhering material such as dirt, grease and wax. Surfaces that have been previously painted or varnished must be stripped back to bare wood. All surfaces should be thoroughly rubbed down using a suitable abrasive paper (working in the direction of the grain) and then dusted off.

    Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead. All screws, nails and other fixings must be non-ferrous.

    Application

    • Brush only.
    • For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended.
    • As with all solvent-based paints, do not apply at temperatures below 5ºC (as recommended by British Standard BS 6150).

    Clearing Up

    After use, remove as much woodstain as possible from brushes before cleaning with brush cleaner.

    Related products

    Back