Opaque Wood Finish Satin 5L
In detail
Johnstone's Trade Opaque Wood Finish is a solvent-based flexible coating for rough sawn timber, fences and cladding.Made to cover as a solid satin finish and hide surface defects.It is a microporous coating made to flex and breathe with the wood and has good resistance to blistering and peeling.Application is by brush with coverage up to 12sq/m per litreIt is recoatable between 16-24 hours.
- Size
- 5L
- Application Methods
- Brush
- Coverage
- Up to 12sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Recoatable
- 12-24 hours
- Scrubbability
- Washable
- Colour
- White
- Finish
- Satin
- Cleanup
- Brush cleaner or White spirit
Available colours
Johnstones Trade Opaque Wood Finish Satin is available in 7 colours from the Johnstones Trade Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Preparation
All surfaces to be treated should be clean, dry and free from loose or flaking material. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Treat any mould or lichen with sterilisation wash as directed. For maximum performance, old paint or varnish should be completely removed. Treat new or bare surfaces with Johnstone's All Purpose Preserver. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
Do not stir. The brush should be fully loaded for best results. Apply paint evenly by brush and avoid overspreading. Recoatable after 16-24
hours under normal conditions.
Coverage
Johnstone's Opaque Wood Finish will cover approximately 12 square metres per litre, depending on the nature and porosity of the surface.
After Use
Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in white spirit or turpentine substitute. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings.
Do not empty product into drains or watercourses.
General Information
To avoid the risk of spillage, always store and transport in a secure upright position. Lift with care - gross weight does not exceed 8 kilograms.