Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Quick Dry Polyurethane Floor Varnish Satin Clear 2.5L

Product Code: HA346910J
Loading ... Expand image

Quick Dry Polyurethane Floor Varnish Satin Clear 2.5L

Product Code: HA346910J
Trustpilot

A hardwearing, water-based finish for interior wooden floors. Resists scuffing, washing and general foot traffic.

£92.48 Inc VAT £77.07 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£92.48 Inc VAT £77.07 Exc VAT
Johnstone's Trade Quick Dry Polyurethane Floor Varnish is a water-based hardwearing coating for interior wooden floors. Suitable for moderate traffic areas and is resistant to scuffing, washing and general foot traffic. 

The transparent finish highlights the woods natural grain and beauty. Application is by brush or spray with coverage up to 12sq/m per litre. Recoatable between 2-4 hours.
Size
2.5L
Barcode
5010426721149
Application Methods
Airless Spray, Brush, HVLP Spray
Coverage
Up to 18sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
1-4 hours
Suitable for...
Interior use
Scrubbability
Washable
Colour
Clear
Finish
Satin
Cleanup
Water & Detergent
Trustpilot

Data Sheets

Additional Information

Surface Preparation

Ensure all surfaces to be varnished are sound, clean, dry and free from dust, grease, polish or any other surface contaminant.

Remove any flaking or cracked varnish. Sound, existing varnish should be rubbed down with fine waterproof abrasive paper, rinsed thoroughly and allowed to dry.

Do not prepare the surface using steel wool.

Previously untreated softwood should be coated with a suitable clear preserver.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precaution should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir thoroughly before use.
  • Apply two or more coats of varnish evenly, by good quality brush along the wood grain as required, paying particular attention to the end grain.
  • Do not overlap the brush strokes.
  • On bare or new wood the first coat can be thinned with up to 10% clean water, followed by two further coats of undiluted varnish.
  • Sand down lightly between coats.
  • Do not apply when temperature is below 10˚C, or when rain or snow is imminent.
  • For best results use a good quality synthetic brush.

Clearing Up

Remove as much product as possible from brushes before cleaning.

Clean equipment immediately after use with warm soapy water and rinse thoroughly. Replace lid firmly.

Do not empty product into drains or watercourses.

Related Products