Visir Primer Solventborne 9L
In detail
Jotun Visir clear primer solventborne has effective film conversing agents that prevents mould growth on wooden surfaces.
- Size
- 9L
- Application Methods
- Brush
- Coverage
- Up to 11sq/m per litre
- VOC level
- High
- Thinning
- Not recommended
- Touch dry
- 24-48 hours
- Recoatable
- 24-48 hours
- Suitable for...
- Exterior use
- Scrubbability
- Washable
- Colour
- Clear
- Finish
- Gloss
- Cleanup
- Brush cleaner or White spirit
- Base
- Solvent-Based
* Colours on screen may vary from actual paint
Data sheets
Additional information
Surface Protection
Substrates must be sound, clean and dry before starting treatment.
New Woodwork: Substrates that have been untreated for more than 4 weeks must be cleaned and loose wood fibres must be removed by sanding or wire brushing. Vacuum impregnated windows must be degreased and all sharp edges rounded before the primer is applied.
Previously Treated Surfaces: Clean with a suitable detergent. Rinse thoroughly with water. Remove loose paint and loose wood fibres by wire brushing before applying a suitable disinfectant. Substrates treated with linseed oil and stains containing linseed oil must be cleaned down to the bare woodwork, as linseed oil can cause blister formation when treated with stains or paints.
Application
New Woodwork:
- Before or immediately after installation treat with a brush coat of Visir.
- The primer must be brushed out thoroughly.
- Use a primer brush and avoid dry brushing. Do not brush cross the coating but apply Visir Clear Primer in the longitudinal direction of the coating. Remember to coat all end grains (3-4 coats wet-on-wet).
- The established woodwork must be finally treated with the desired product as soon as possible and within 3 months at the latest.
Previously Treated Surfaces:
- Brush bare woodwork with one coat of Visir Clear Primer. The primer must be brushed out well or the product will create a film on the surface.
- Remove any excess primer whilst wet.
