Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Patina Surface Treatment 320G

Product Code: HA4065Q
Loading ... Expand image

Patina Surface Treatment 320G

Product Code: HA4065Q
Trustpilot

Thixotropic gel based treatment for interior timber surfaces, easy to apply, durable and hardwearing.

£9.53 Inc VAT £7.94 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
5 working days
£9.53 Inc VAT £7.94 Exc VAT
Langlow Patina is a gel treatment for interior timber surfaces such as doors, trim, joinery and furniture.Can be built up to vary the sheen level from matt to satin depending on the number of coats applied and dries to a clear finish.
The thixotropic, non-drip formula makes it easy to apply. Application is by sponge or cloth with each 320g container covering up to 15sq/m depending on the surface it is applied to.
Size
320G
Barcode
5011338178960
Coverage
Up to 15sq/m per litre
Suitable for...
Interior Use
Trustpilot

Data Sheets

Additional Information

Surface Preparation

Ensure all wooden structures to be treated are sound, clean and free of any worn, damaged or flaking previously applied coatings. Timbers effected by contact with moisture should be thoroughly dried out and pre-treated with a clean universal wood preservative to protect against any wood destroying fungi or insects.

To provide a consistent finish, the surface may need a light sanding with a fine mesh paper, to lift out any grime or dirt held within the grain structure. Generally on old worn timbers, previously applied coatings will show some signs of damage and will therefore need taking back to bare timber using, either an appropriately selected fine sand paper, paint/varnish remover or Langlow Old Wood Reviver to remove the defective original coating and reveal a consistent base on which to apply.

Application

  • Apply directly using a clean, dry cloth to dab and rub the gel firmly into all areas of the timber structure.
  • Avoid over-spreading by wiping any surplus material and spreading the product as a thin, even and consistent layer in all areas.

Related Products