Osmo Cedar UV-Protection-Oil Extra is a satin-matt finish for exterior. It is based on natural oils, is microporous, and does not crack, flake, peel or blister.
As a stand alone finish, with two coats, it delays the greying process on vertical surfaces by UV-Protection factor 12 in comparison to untreated wood.
The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.
For all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and windowsills, carports, timber cladding, balcony, screens & fences, pergolas, garden houses and furniture.
Based on natural vegetable oils (sunflower-oil, soyabean-oil, thistle-oil and linseed-oil), siccatives (drying agents), inorganic pigments and additives. Disaromatized white spirit (benzene-free). This product fulfils EU-Regulation (2004/42/EC) according to the VOC limit value max. 400 g/I (Cat. A/e (2010).
Full declaration of ingredients upon request.
Shelf life is 5 years or more if can is tightly closed. Store in a dry place. If thickened by frost it will regain a normal consistency under normal temperatures within 24-36 hours.
Wood surface must be clean, dry and frost-free (maximum moisture content 20%).
Osmo Cedar UV-Protection-Oil is ready to use, please do no thin, stir well before use. Clean old microporous finishes thoroughly. Remove old varnishes.
Please do not sand even surfaces finer than P120. Always wear a dust mask when sanding.
If additional protection against blue stain, rot and mildew is required for outdoors pre-treat (if possible from all sides) with Osmo Base Coat WR.