Osmo
UV-Protection Oil Extra Satin Matt 428 Cedar 2.5L

HA4760J
Protective finish for exterior wood. Flexible and microporous. UV resistant. Protects against mould. Safe for children, animals and plants.
UV-Protection Oil Extra Satin Matt 428 Cedar
Share...

In detail

Osmo UV-Protection Oils is a natural oil-based and microporous finish which does not crack, flake, peel or blister. Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage. 

External elements of weathering fade the natural colour of the wood to a grey patina over time, but UV-Protection Oil has been developed to resist against this, whilst maintaining the wood's natural appearance. 

Ideal for windows, doors, cladding, fencing and other vertically structured joinery to block the greying process of the wood by a UV-protected factor of 12 in comparison to untreated wood. 

Application is by brush with coverage up to 16sq/m per litre.

Size
2.5L 
Application Methods
Brush
Coverage
Up to 18sq/m per litre 
VOC level
Low 
Thinning
Do not thin 
Touch dry
1-4 hours 
Recoatable
8-12 hours 
Scrubbability
Washable 
Colour
428 Cedar 
Finish
Eggshell 
Cleanup
Brush cleaner or White spirit 

Available colours

Osmo UV-Protection Oil Extra Satin Matt 428 Cedar is available in 1 colours from the Osmo Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Product description
    Osmo Cedar UV-Protection-Oil Extra is a satin-matt finish for exterior. It is based on natural oils, is microporous, and does not crack, flake, peel or blister.
    As a stand alone finish, with two coats, it delays the greying process on vertical surfaces by UV-Protection factor 12 in comparison to untreated wood.
    The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.

    Recommended use
    For all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and windowsills, carports, timber cladding, balcony, screens & fences, pergolas, garden houses and furniture.

    Ingredients
    Based on natural vegetable oils (sunflower-oil, soyabean-oil, thistle-oil and linseed-oil), siccatives (drying agents), inorganic pigments and additives. Disaromatized white spirit (benzene-free). This product fulfils EU-Regulation (2004/42/EC) according to the VOC limit value max. 400 g/I (Cat. A/e (2010).
    Full declaration of ingredients upon request.

    Storage
    Shelf life is 5 years or more if can is tightly closed. Store in a dry place. If thickened by frost it will regain a normal consistency under normal temperatures within 24-36 hours.

    Preparation
    Wood surface must be clean, dry and frost-free (maximum moisture content 20%).
    Osmo Cedar UV-Protection-Oil is ready to use, please do no thin, stir well before use. Clean old microporous finishes thoroughly. Remove old varnishes.
    Please do not sand even surfaces finer than P120. Always wear a dust mask when sanding.
    If additional protection against blue stain, rot and mildew is required for outdoors pre-treat (if possible from all sides) with Osmo Base Coat WR.