- Application Methods
- Up to 16sq/m per litre
- VOC level
- Do not thin
- Touch dry
- 4-8 hours
- 12-24 hours
- Brush cleaner or White spirit
To get the best results, ensure surface to be varnished are sound, clean and dry (new surfaces particularly must be fully dry) before testing. Remove all loose and defective coatings, if necessary stripping back to bare wood.
Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead.
Thoroughly rub down all surfaces in the direction of the grain to provide a 'key', using 'wet flatting' methods where possible, then wipe off with a damp, lint free cloth.
Brush only. For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended.
As with all solvent-based paints, do not apply at temperatures below 5ºC (as recommended by British Standard BS 6150)
After use, remove as much product as possible from equipment before cleaning with brush cleaner.