- Application Methods
- Up to 20sq/m per litre
- VOC level
- Do not thin
- Touch dry
- Up to 1 hour
- 1-4 hours
- Suitable for...
- Interior use
- Water & Detergent
To get the best results, ensure surface to be varnished are sound, clean and dry (new surfaces particularly must be fully dry) before testing. Clean off any wax polish, grease or finger marks with white spirit.
Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead.
Thoroughly rub down all surfaces in the direction of the grain to provide a 'key', using 'wet flatting' methods where possible, then wipe off with a damp, lint free cloth.
Brush or roller only. Do not spray. For best results, use a good quality synthetic (nylon polyester) brush, designed for use with water-based paints, stains and varnishes. Brush out evenly, taking care to avoid overlaps and finishing along the grain.
After use, remove as much product as possible from brushes before cleaning with brush cleaner.