Polyvine
Exterior Wood Varnish Satin Clear 1L

HC411705N
Tough, quick drying, easy to apply, non-yellowing for exterior wood.
Exterior Wood Varnish Satin Clear
Share...

In detail

A tough, quick drying, easy to apply, non-yellowing varnish for exterior wood. 

Protects against UV light and rain damage. Resistant to cracking and blistering.

Size
1L 
Application Methods
Brush
Coverage
Up to 20sq/m per litre 
VOC level
Low 
Thinning
Not required 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Scrubbability
Washable 
Colour
Clear 
Finish
Satin 
Cleanup
Water & Detergent 

Additional information

Surface Preparation

Ensure the surface to be coated is clean and free from grease, wax or polish.

New wood should be allowed to dry thoroughly before assembly begins. If the wood is green or has been pressure treated allow to dry before coating (below 18% moisture content).

Previously painted wood should have the coating completely removed with 60/80 grit sandpaper

Application

  • Apply liberally with a good quality synthetic brush, apply in the direction of the grain, maintain a wet coat.
  • Allow 4 hours between coats.
  • Best application temperature 10°C/50°F to 30°C/90°F. Do not apply in direct sunlight or when rain is imminent.
  • Saturate all end grains.

Clean Up

Any equipment used can be cleaned using soap and water before the clear coat dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them.