Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Cetol TSI Satin Plus Satin 1L - 006 Light Oak

Product Code: HC6505006N
Loading ... Expand image

Cetol TSI Satin Plus Satin 1L - 006 Light Oak

Product Code: HC6505006N
Trustpilot

Medium-build satin woodstain for interior wood. Resistant to knocks, scuffs, spills and cleaning.

* Colours on screen may vary from actual paint

£37.99 Inc VAT £31.66 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£37.99 Inc VAT £31.66 Exc VAT
Sikkens Cetol TSI Satin Plus is a solvent-based woodstain for interior wood. 
Suitable for use on doors, windows, joinery and furniture. Good resistance to knocks, abrasion, water and mild household cleaners. 

Application is by brush with coverage up to 13sq/m per litre. Touch dry between 1-2 hours and recoatable in 24 hours.
Size
1L
Barcode
8711115296142
Application Methods
Brush
Coverage
Up to 13sq/m per litre
VOC level
High
Thinning
Not Recommended
Touch dry
1-4 hours
Recoatable
12-24 hours
Scrubbability
Wipeable
Colour
006 Light Oak
Finish
Satin
Cleanup
Brush cleaner or White spirit
Trustpilot

Data Sheets

Additional Information

Surface Preparation

Degrease any exposed bare timber surface by wiping with a cloth dampened with methylated spirits. Certain timber species contain high levels of natural wood extractives or exudates and some softwoods can be highly resinous. Resinous deposits should be removed with a scraper. Any remaining residues should be removed with a lint-free cloth dampened with methylated spirits, frequently changing the face of the cloth. Allow solvent to evaporate fully before overcoating. The use of both eye and hand protection is strongly advised.

Ensure product is thoroughly stirred before and during application, otherwise colour and sheen variations may be experienced. Cetol TSI Satin plus is supplied ready for use and does not require thinning.

Application

  • For best results use a good quality, long haired soft bristle brush.
  • 3 coats of Cetol TSI Satin plus should be applied, allowing a minimum of 16 hours drying time between coats.
  • The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish.
  • Avoid overbrushing, as this will produce brush marks and a poor quality finish.
  • Apply to a minimum wet film thickness of 54 micrometres.

Related Products