Fast drying, for interior and exterior use on bare knots.
Sandpaper first then apply, but do not sandpaper again once knotting has been applied.
- Application Methods
- Up to 12sq/m per litre
- VOC level
- Do not thin
- Touch dry
- 1-4 hours
- Up to 1 hour
- Methylated Spirit
Do not use under dyes, stains, water based varnish and water based paints. If a water based coating is to be used, first seal the knotting with an oil based primer or undercoat, this will prevent the knotting discolouring the coating. Knotting prevents the discolouration of paint and is not designed to hold back excess resin in knots. Any excess resin should be removed using a heat gun prior to decorating.
For sealing knots, resinous and creosoted timber to prevent bleeding through paint film. Sandpaper surface smooth before applying knotting liberally over knots and surrounding area. Do not sandpaper knotting once applied. Resinous and creosoted timber should be sealed completely with 2 coats. Allow 1 hour before priming. Clean brushes with methylated spirits.