Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Danish Oil Satin 250ML

Product Code: HG50R
Loading ... Expand image

Danish Oil Satin 250ML

Product Code: HG50R
Trustpilot

Suitable for all types of bare wood, giving a natural low lustre finish.

£10.49 Inc VAT £8.74 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£10.49 Inc VAT £8.74 Exc VAT
A blend of oils that gives a durable satin finish. 
Suitable for use on all bare wood and joinery. 

This product brings out the natural beauty of wood and veneered surfaces and is easy to maintain. 
Size
250ML
Barcode
5015332200016
Application Methods
Brush, Cloth
Coverage
Up to 14sq/m per litre
VOC level
High
Thinning
Not required
Touch dry
1-4 hours
Recoatable
4-8 hours
Scrubbability
Wipeable
Finish
Satin
Cleanup
Brush cleaner or White spirit
Trustpilot

Data Sheets

Additional Information

Preparation
The surface must be clean, sanded smooth and free from contaminants like wax and dirt. For best results apply to dry, sound wood with a moisture content between 12-20%. Do not apply to green timber. Oily woods (e.g. Teak. Iroko) should be cleaned thoroughly with white spirit before application of Danish Oil. Exterior wood requires a minimum of 3 coats applied liberally and not wiped off.

To improve the penetration and durability dilute the first coat 20% with white spirit. If applying Danish Oil to veneered doors, it is advisable to check with the door manufacturer before proceeding. Exterior wood will require regular re-oiling, especially on horizontal surfaces and in very exposed conditions. Oak and softwoods are prone to weather staining caused by moisture activating mould spores present naturally in the wood. It is advisable to treat the wood with Rustins Advanced Clear Wood Preserver before applying Danish Oil. Extra coats of Danish Oil are required to effectively seal these timbers. If in doubt use Rustins Outdoor Clear Varnish or Rustins Flexterior. Bare wood may be dyed if required with Rustins Wood Dye. If a natural open grain is not required such as with oak, then use Rustins Grain Filler prior to oiling.

Application
Using a clean soft cloth or brush apply liberally, then wipe off the excess after a few minutes. For a superior smooth finish the final coat may be applied using a plastic scouring pad, rubbing in the direction of the grain, wiping away the surplus with a soft cloth or paper towels. New or bare wood should be oiled 3 times initially.

Re-Coating Time
Allow 4 to 8 hours between applications depending on the temperature and humidity.

Maintenance
When applying to previously oiled wood, the surface should be cleaned and any wax removed using white spirit or Rustins Surface Cleaner. Wipe away the solution formed with clean paper towels, prior to re-oiling. If the surface develops a slight gloss, this can be removed by rubbing with grade 00 or 000 steel wool and either wax polish or white spirit finishing off with a soft cloth. If compatibility with a previously coated surface is not known, then test by applying to a small area first.

Coverage
1 litre covers approximately 14 square metres per coat depending on the absorbency of the wood.

Cleaning
Remove excess product from brushes before cleaning whilst wet with white spirit or Rustins Brush Cleaner. Hard brushes can be cleaned with Rustins Brush Restorer.