- Suitable for...
- Interior and exterior use
Surfaces must be solid, clean, dry, and free from grease and dust. Cut the cartridge seal and screw nozzle which would be cut to your required size. Using a skeleton gun, apply the sealant into the gap or joint ensuring a good solid fill making sure no air is trapped behind. If required place masking tape along joint edges, removing within 5 minutes of application. Tool using spatula wetted with clean water within 5 minutes of application. In deep joints reduce the joint depth to 50% of the joint width using expanding foam or joint backer rod.
Among others, it is not recommended for use on PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Curing is subject to humidity and temperature. Not suitable for use with aquaria. Yellowing can occur in areas closed of UV light or if contact is made with chemical fumes. Compatibility and adhesion tests prior to application are recommended. It is the user's responsibility to determine suitability. Store between +5°C and +25°C in cool, dry conditions.