Premium Paintable Frame & Glazing Sealant White 290ml
In detail
Brewers Premium Paintable Frame & Glazing Sealant is a premium grade, highly flexible, paintable sealant for sealing and draught-proofing doors and window frames, both internally and externally. Also suitable for expansion connection and perimeter joints. It adheres without primer to most substrates.
- Size
- 290ml
- Suitable for...
- Interior and exterior use
Additional information
Directions
Surfaces must be solid, clean, dry, and free from grease and dust. Cut the cartridge seal and screw on the nozzle which should be cut to your required size. Using a skeleton gun, apply the sealant into the gap or joint ensuring a good solid fill. If required, place masking tape along edges, removing within 5 minutes of application. Tool using spatula wetted with clean water within 5 minutes of application. Uncured sealant can be removed with water. Can be painted when sealant is fully cured.
Limitations
Among others, it is not recommended for us on PE, PP, PC, PMMA, PTFE, soft plastics, natural stone, mirrors, neoprene and bituminous substrates. Curing is subject to humidity and temperature. Do not use in damp or wet conditions or if rain is imminent. Not suitable for aquaria, continuous water immersion or in combination with chlorides, compatibility and adhesion tests prior to application are recommended. It is the users responsibility to determine suitability. Smooth off whilst wet, do not attempt to abrade when cured. Crazing and cracking in the paint film may occur when overpainting with water-based paints which contain and above average filler content. Store between +5°C and +25°C in cool shaded, dry conditions.