- Suitable for...
- Interior and exterior use
Surfaces must be solid, clean, dry, and free from grease and dust. Very porous substrates such as gypsum, aerated concrete and limestone etc should be primed using a mixture of 1 part Ultimate Caulk and 2 parts water. Apply at temperatures of +5°C to +40°C (applies to environment and substrate). Cut the cartridge seal and screw on the nozzle which should be cut to the required size. Using a skeleton gun, apply the product into the gap or joint ensuring a good solid fill. If required, place masking tape along edges removing within 10 minutes of application. Tool using a spatula wetted with clean water within 10 minutes of application. Uncured sealant can be removed with water.
Among others, it is not recommended for use on PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Curing is subject to humidity and temperature. Not recommended for continuous water immersion. Compatibility and adhesion tests prior to application are recommended. It is the user's responsibility to determine suitability. Smooth off whilst wet, do not attempt to abrade when cured. Store between +5°C and +25°C in cool, dry conditions. Whilst crazing, cracking, discolouration is unlikely, it cannot be guaranteed.