Fungicidal Wash 5L
NN35F
Call to check stock at your local Brewers
A water based concentrated solution for use on exterior surfaces
Share...
In detail
Sandtex Fungicidal Wash is a ready to use solution for the prevention and treatment of organic growth on exterior previously decorated or undercoated surfaces. This product has been Approved under the Control of Pesticides Regulations 1966 for use as directed.
This product can also be used on interior surfaces, but ideal for exterior walls, paths and patios. Kills mould, fungal growth and algae. Drying time can vary from 20 minutes and upwards depending on temperature and humidity.
- Size
- 5L
- Coverage
- Up to 10sq/m per litre
- Suitable for...
- Interior and exterior use
Data sheets
Additional information
Sandtex Fungicidal Wash is a ready to use formula for treatment of mould algal, fungal or lichen growth on wood or masonry surfaces.
Preparation
Thorough surface preparation is essential.
Application
- Please follow statutory conditions relating to use below.
- Where severe, two applications may be necessary.
- Apply with a nylon bristle brush, scrub into surface, leave to dry.
- All signs of organic growth should then be removed with a scraper or stiff, bristle brush, not wire.
- Avoid the inhalation of dust.
- Wash surface and allow to dry.
- Apply 1 litre of product per 5-10 square meters.
Cleaning
Remove as much as possible from brushes before cleaning with soapy water.
