Primer Undercoat White 5L
Product Code: AD0105001F
Primer Undercoat White 5L
Product Code: AD0105001F
Crown Trade Full Undercoat White has excellent adhesion and opacity, finish for interior and exterior use. Good wet edge retention.
- Store stocked line
Trade customer? - log in to get your prices
£55.49
Inc VAT
£46.24
Exc VAT
Crown Trade Primer Undercoat is an oil-based product that is applied by brush and is suitable for interior and exterior use.
Touch dry in 4-6 hours and recoatable after 16-24 hours.
Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.
- Size
- 5L
- Barcode
- 5010131014819
- Application Methods
- Brush, Roller
- Coverage
- Up to 18sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 5-8 hours
- Recoatable
- 12-24 hours
- Colour
- White
- Colour type
- White
- Cleanup
- Brush cleaner or White spirit
- Base
- Oil
Data Sheets
-
Health and Safety Data Sheet The Health and Safety data sheet for Primer Undercoat White 5L
-
Product Data Sheet The Product data sheet for Primer Undercoat White 5L
Additional Information
For Interior and Exterior use. Crown Trade Full Undercoat is a high quality undercoat with superior filling properties.
Full Undercoat provides excellent obliteration, maximum gloss hold-out and good edge retention and is the perfect foundation for Crown Trade Gloss.
Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Bare or friable surfaces should be primed with the appropriate Crown Trade Primer.
Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.
Application
Stir thoroughly. May be applied by brush or roller. A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.
Do not use in temperatures below 8°C or in high humidity.
Spreading Capacity
Up to 18m² per litre. Spreading rate dependent on surface texture and porosity.
Drying
Touch dry in 4-6 hours.
Overcoatable after 16 hours.