Dulux Trade
Vinyl Matt (Tinted) Honest Touch 2.5L

AE0115030J
NCS: 80YR57179
Quick drying, very high opacity, matt finish for interior use creating a tough, wipeable finish.
Vinyl Matt (Tinted)
Share...

In detail

Dulux Trade Vinyl Matt is a low VOC content matt finish. A wipeable product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. Suitable for interior use. Touch dry in 1-2 hours and recoatable after 2-4 hours. 

Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Wipeable products are suitable for light traffic areas where occasional cleaning is required. 

Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations. 

Size
2.5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 17sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Wipeable 
Colour type
Tinted 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Available colours

Dulux Trade Vinyl Matt (Tinted) is available in 11093 colours from the Dulux Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    A top quality, high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage with a high quality finish. Dulux Trade Vinyl Matt has a smooth flow for easy application. Suitable for all normal interior wall and ceiling surfaces.

    *compared with previous formulation pre-June 2017, Vinyl Matt Light & Space has not been upgraded.

    Surface Preparation

    To get the best results with Dulux Trade Vinyl Matt, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

    System Information

    • Application: Brush, roller or spray.
    • Stir thoroughly before use.
    • Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Matt but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient.

    Cleaning Up

    After use, remove as much paint as possible from equipment before cleaning with water. Do not use or store in extremes of temperature and protect from frost.