Dulux Trade
Sterishield Diamond Eggshell 5L

AE0135605F
A scrubbable anti-bacterial coating for interior walls and ceilings. Helps inhibit bacteria, MRSA and E.coli.
Sterishield Diamond Eggshell
Share...

In detail

Dulux Trade Sterishield Diamond Eggshell is a scrubbable anti-bacterial coating for interior walls and ceilings. Helps inhibit bacteria, MRSA and E.coli when used alongside appropriate cleaning. 

Low-odour, water thinnable and recoatable in 2-4 hours. Suitable for application by brush, roller or spray, with coverage up to 16m² per litre. 

Available in Pure Brilliant White, Magnolia and a range of over 14,000 colours.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 16sq/m per litre 
VOC level
Low 
Thinning
Water 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Scrubbable 
Colour
Pure Brilliant White 
Finish
Eggshell 
Cleanup
Water & Detergent 
Base
Water-Based 

Available colours

Dulux Trade Sterishield Diamond Eggshell is available in 11069 colours from the Dulux Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

    Remove all blistering, poorly adhering or otherwise defective coatings. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.

    Where necessary, wash the surface to remove dirt grease and powdery or dusty residues. Rinse with clean water and allow it to dry. Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer. Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.

    Application

    Application is by brush, roller or airless sprayer.

    As with all water based paints, do not apply at temperatures below 8ºC (as recommended by British Standard BS 6150).

    Thinning on new or bare surfaces: Add up to 1 part clean water to 10 parts paint.

    Normal use (not to be exceeded): Add up to 1 part clean water to 10 parts paint.

    Conventional spray application: Add up to 1 part clean water to 2.5 parts paint.

    Airless spray application: Add up to 1 part clean water to 5 parts paint.

    Cleaning up

    After use, remove as much product as possible from equipment before cleaning with water.