Dulux Trade
Cladshield 5L

AE184505F
Highly durable coating ideal for previously coated and weathered cladding. Water-based.
Cladshield
Share...

In detail

Dulux Trade Cladshield is for exterior use on plastisol coated and coil cladded buildings. 

A tough and highly durable product that is suitable for application over previously coated and weathered clad surfaces. 

Application is by brush, roller or spray with coverage up to 17sq/m per litre. Recoatable between 4-6 hours.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 17sq/m per litre 
VOC level
Low 
Thinning
Water 
Recoatable
4-8 hours 
Suitable for...
Exterior use 
Scrubbability
Washable 
Lifespan
Up to 10 years 
Colour type
Tinted 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Available colours

Dulux Trade Cladshield is available in 1477 colours from the Dulux Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Minimum surface preparation: Thoroughly clean the surface to remove dirt, grease and chalk. High pressure water jet or scrubbing manually are not recommended when re-coating existing Cladshield from Dulux Trade coatings.

    Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash.

    Remove any poorly adhering or defective Plastisol and PVF2 coatings and manually or mechanically prepare bared surfaces to remove all contamination and corrosion.

    Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

    Application

    • Brush, roller, conventional spray or airless spray.
    • Do not use in extremes of temperature (below 10ºC) or during rain, fog or relative humidity above 80%.

    Cleaning up

    After use, remove as much product as possible from equipment before cleaning with water.