Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Aqua Gloss Brilliant White 5L

Product Code: AF032005F
Loading ... Expand image

Aqua Gloss Brilliant White 5L

Product Code: AF032005F
Trustpilot

Low odour, water based, gloss finish for interior and exterior use while retaining the properties of a solvent gloss.

£66.98 Inc VAT £55.82 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£66.98 Inc VAT £55.82 Exc VAT
Johnstone's Trade Aqua Gloss is a low VOC content gloss finish. A washable product which is thinned with water and is applied by brush. 
  • Suitable for Interior and exterior use. 
  • Touch dry in 1-2 hours and recoatable after 4-6 hours. 
Water based gloss is a tough, durable high sheen finish for wood and metal, which is non-yellowing and provides good resistance to knocking and scuffing.

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.
Size
5L
Barcode
5010426815091
Application Methods
Brush
Coverage
Up to 12sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
4-8 hours
Suitable for...
Interior and exterior use
Scrubbability
Washable
Colour
Brilliant White
Colour type
White
Finish
Gloss
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

Surface Preparation

All surfaces to be painted should be clean, dry and free from all loose and flaking material. Prime bare wood surfaces with Johnstone’s Aqua Water Based Undercoat. Prime all other bare surfaces with an appropriate primer and rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precautions should be taken during surface preparation of pre-1960’s painted surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir well.
  • Easy to apply by brush.
  • Do not apply in temperatures below 10ËšC or externally when rain is imminent.
  • For best results use a good quality synthetic brush.

Clearing up

Remove as much product as possible from application equipment before cleaning. Replace lid firmly.

Clean equipment immediately after use with warm soapy water and rinse thoroughly.

Do not empty product into drains or watercourse.

Related Products