Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Aqua Satin Colour (Tinted) 1L

Product Code: AF033505N
Loading ... Expand image

Aqua Satin Colour (Tinted) 1L

Product Code: AF033505N
Trustpilot

Quick drying, satin finish for interior and exterior use on wood and metal. Stays whiter for longer.

£37.49 Inc VAT £31.24 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£37.49 Inc VAT £31.24 Exc VAT

Johnstone's Trade Aqua Satin is a low VOC content mid sheen finish. A washable product which is thinned with water and is applied by brush.  

  • Suitable for interior and exterior use. 
  • Touch dry in 1-2 hours and recoatable after 4-6 hours.  
Water based satin is a tough, durable mid sheen finish for wood and metal, which is non-yellowing and provides good resistance to knocking and scuffing. 

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

What is a tinted product?
This means the chosen colour and paint finish has been mixed to order, especially for you.

Size
1L
Barcode
5010426772486
Application Methods
Brush
Coverage
Up to 12sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
4-8 hours
Suitable for...
Interior and exterior use
Scrubbability
Washable
Colour type
Tinted
Finish
Satin
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

Surface Preparation

All surfaces to be painted should be clean, dry and free from all loose and flaking material. Prime bare wood surfaces with Johnstone’s Aqua Water Based Undercoat. Prime all other bare surfaces with an appropriate primer and rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precautions should be taken during surface preparation of pre-1960’s painted surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir well.
  • Easy to apply by brush.
  • Avoid overspreading.
  • Do not apply in temperatures below 10ËšC or externally when rain is imminent.
  • For best results use a good quality synthetic brush.

Clearing up

Remove as much product as possible from application equipment before cleaning. Replace lid firmly.

Clean equipment immediately after use with warm soapy water and rinse thoroughly.

Do not empty product into drains or watercourse.

Related Products