Stormshield Quick Dry Stabilising Solution Clear 5L
In detail
Johnstone's Trade Stormshield Quick Dry Stabilising Solution is a low VOC content finish. A product which is thinned with water and is applied by brush or roller and is suitable for exterior use.
- Size
- 5L
- Application Methods
- Brush, Roller
- Coverage
- Up to 10sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Recoatable
- 1-4 hours
- Suitable for...
- Exterior use
- Colour
- Clear
- Cleanup
- Water & Detergent
- Base
- Water
* Colours on screen may vary from actual paint
Data sheets
Additional information
Surface Preparation
All surfaces to be stabilised should be clean, dry and free from loose and flaking material.
Repair cracks and defective areas and treat fungal or algal growth with Johnstones Sterilisation Wash as directed.
Wear a suitable face mask when creating dust.
Application
- Stir well before use.
- Apply one coat of Quick Dry Stabilising Primer liberally by brush, working the primer well into the surfaces.
- Do not apply under conditions less than 10°C or externally when rain is imminent.
Clearing Up
Remove as much product as possible from application equipment before cleaning. Replace lid firmly.
Clean equipment immediately after use with warm soapy water and rinse thoroughly.
Do not empty product into drains or watercourses.
