Flortred White 5L
In detail
Johnstone’s Trade Flortred is a highly durable single pack floor coating with excellent levels of film hardness. The semi-gloss coating is resistant to mild chemicals, water, oil, grease and impact. You can use Johnstone’s Trade Flortred in areas subject to light to medium traffic, including corridors, walkways and domestic garages. Also suitable for exterior use to highlight car park spaces and other markings.
- Size
- 5L
- Application Methods
- Brush, Roller
- Coverage
- Up to 16sq/m per litre
- VOC level
- High
- Thinning
- TC2 Thinner and Cleaner
- Recoatable
- 12-24 hours
- Suitable for...
- Interior use
- Scrubbability
- Washable
- Colour
- White
- Colour type
- Ready Mixed
- Finish
- Satin
- Cleanup
- TC2 Thinner and Cleaner
- Base
- Solvent-Based
Data sheets
Additional information
Preparation
All surfaces to be painted should be clean, dry and free from dust, laitance, loose and flaking material. New concrete or cement should be allowed to mature for several months before painting. Very dense smooth concrete surfaces (such as power floated concrete) normally require to be acid etched before painting in order to promote satisfactory adhesion.
Application
- Stir well before use.
- Apply by brush or roller which should be fully loaded for best results.
- Apply paint evenly and avoid overspreading.
- To ease application, the first coat may be thinned with up to 5% by volume of TC2 Thinner & Cleaner.
- Allow to dry overnight before applying a second coat if required.
- If more than one can of a colour is to be used in the same area, intermix before use.
Coverage
Johnstone's Flortred will cover approximately 16 square metres per litre depending on the nature and porosity of the surface being painted.
Drying Time
Recoatable after 16-24 hours under normal conditions. The coating is fully cured in 7 days.
