Wood Primer White 2.5L
Wood Primer White 2.5L
Solvent based, matt finish for interior and exterior use on new or bare wood surfaces.
- Size
- 2.5L
- Barcode
- 5023229112021
- Application Methods
- Brush
- Coverage
- Up to 13sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Recoatable
- 12-24 hours
- Suitable for...
- Interior and exterior use
- Colour
- White
- Cleanup
- Brush cleaner or White spirit
- Base
- Oil
Data Sheets
-
Health and Safety Data Sheet The Health and Safety data sheet for Wood Primer White 2.5L
-
Product Data Sheet The Product data sheet for Wood Primer White 2.5L
Additional Information
Surface Preparation
All surfaces to be painted should be clean, dry and free from loose and flaking material.
Rub down bare timber surfaces with abrasive paper to remove raised grains and sharp edges.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Apply Knotting Solution to knots and resinous areas and allow to dry thoroughly.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
- Stir well.
- Easy to apply by brush.
- Prime all joints, end grains and other surfaces liberally, brushing the paint well into the timber.
- On oily or resinous timber Johnstone’s Aluminium Wood Primer is more suitable.
Clearing Up
Remove as much product as possible from application equipment before cleaning. Replace lid firmly.
Clean equipment immediately after use with White Spirit or Turpentine Substitute.
Do not empty product into drains or watercourses.