Armstead Trade Smooth Masonry is a low VOC content matt finish. A washable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray.
Suitable for exterior use and touch dry in 1-2 hours and recoatable after 2-4 hours. Armstead Trade Smooth Masonry has an attractive high build finish and provides excellent coverage and application.
- Application Methods
- Airless Spray, Brush, Roller
- Up to 12sq/m per litre
- VOC level
- Touch dry
- 1-4 hours
- 1-4 hours
- Up to 15 years
- Brilliant White
- Water & Detergent
* Colours on screen may vary from actual paint
To get the best results with Armstead Trade Smooth Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry).
Brush, roller or spray.
STIR THOROUGHLY BEFORE USE. On very absorbent surfaces a sealing coat of thinned Armstead Trade Smooth Masonry (up to 1 part clean water to 5 parts paint) should be applied. The normal finishing process is 1 or 2 full coats of Armstead Trade Smooth Masonry. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 12m²/I depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area.
After use, remove as much paint as possible from equipment before cleaning with water. Do not use or store in extremes of temperature. When this paint container is empty please ask your stockist about recycling.