Armstead Trade Pliolite Masonry is a high VOC content matt finish. Applied by brush or roller, suitable for exterior use and touch dry in 1-1.5 hours and recoatable after 12 hours.
Armstead Trade Pliolite Masonry provides up to 15 year protection is resistant to moisture and alkali attack and can be applied down to -5°C.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
- Application Methods
- Brush, Roller
- Up to 8sq/m per litre
- VOC level
- Not Recommended
- Touch dry
- 1-4 hours
- 8-12 hours
- Up to 15 years
- Brilliant White
- Brush cleaner or White spirit
* Colours on screen may vary from actual paint
To get the best results with Armstead Trade Pliolite® Based Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry).
Brush, roller or spray.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 1 or 2 coats of Armstead Trade Pliolite® Based Masonry. Touch dry 1-1.5 hours at 20°C/65%RH. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 8m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.
After use, remove as much paint as possible from equipment before cleaning with brush cleaner. Do not use or store in extremes of temperature. When this paint container is empty please ask your stockist about recycling.