Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Problem Solving Primer 1L

Product Code: AV0505N
Loading ... Expand image

Problem Solving Primer 1L

Product Code: AV0505N
Trustpilot

A water-based multi-surface primer with excellent stain blocking properties and adhesion on problem surfaces.

£38.48 Inc VAT £32.07 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£38.48 Inc VAT £32.07 Exc VAT
Blackfriars Problem Solving Primer is a water-based multi-surface primer. Made to cover stains such as water, nicotine and soot damage and etches onto problem surfaces such as ceramic tile and melamine finishes. 
Also an ideal primer for MDF board. Can be over coated with water-based and solvent-based coatings. Recoatable in 4 hours with coverage up to 11sq/m/L
Size
1L
Barcode
5013296610049
Application Methods
Airless Spray, Brush, Pad, Roller
Coverage
Up to 11sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
4-8 hours
Suitable for...
Interior use
Colour
White
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

Preparation

Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination.

Application

Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. Apply one or two coats as required.

Thinning

Not recommended.

Limitations

Do not use under cold (less than 10°C), damp or humid conditions. Do not apply to damp or wet surfaces. Do not cross contaminate with other water based coatings - use clean, dry brushes and application equipment. If used as a stain blocker the surface must be completely dry. For heavy staining more than one coat may be required. Take care if tinting - do not tint with other types of water-based paint, even some universal colourants may not be compatible - a test sample is advised.

Coverage

Up to 10m² per litre per coat.

Drying Time

Touch dry in 1 - 2 hours. Recoat after 4 hours. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Clean Up

Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage

Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.

Related Products