Direct to Rust Metal Paint Hammered Dark Green (Ready Mixed) 2.5L
In detail
Hammerite Direct to Rust Metal Paint is a high VOC content gloss finish. A washable product which cannot be thinned and is applied by brush or roller. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing.
- Size
- 2.5L
- Application Methods
- Brush, Roller
- Coverage
- Up to 10sq/m per litre
- VOC level
- High
- Thinning
- Do not thin
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Scrubbability
- Washable
- Colour
- Dark Green
- Finish
- Gloss
- Cleanup
- Hammerite Brush Cleaner & Thinners
- Base
- Oil
* Colours on screen may vary from actual paint
Available colours
Hammerite Direct to Rust Metal Paint Hammered Dark Green (Ready Mixed) is available in 1 colours from the Hammerite Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers.
Additional information
Surface Preparation
- Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
- Remove dirt, dust, and grease with diluted detergent. Rinse with clean water and allow time to dry.
- Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
- If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.
- On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
Application
Ideal application temperature = 8°C to 25°C.
Lightly stir before use. Do not mix vigorously.
Brush Application:
- Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient.
- On bare/rusty metal, 2 coats are required.
- Ensure that all edges and corners are adequately covered.
- Do not over-apply, as sagging will occur.
Conventional Spray Application:
- Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% thinners to paint.
- Set spray gun at 25/35psi and use full fan spray at maximum volume.
- Apply 4 thin coats. Allow 1 hour between coats.
- Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers.
Cleaning and Storage
- After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.
- Do not use or store in extremes of temperature.
){kind=link}