Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Direct to Rust Metal Paint Smooth White 750ML

Product Code: BG1510001NA
Loading ... Expand image

Direct to Rust Metal Paint Smooth White 750ML

Product Code: BG1510001NA
Trustpilot

Fast drying, metal protecting, gloss finish for exterior use on rusty surfaces

£27.49 Inc VAT £22.91 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£27.49 Inc VAT £22.91 Exc VAT
Hammerite Direct to Rust Metal Paint is a high VOC content gloss finish. A washable product which cannot be thinned and is applied by brush or roller. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. 
Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat. Suitable for exterior use. Touch dry in 1-2 hours and recoatable after 4 hours.
Size
750ML
Barcode
5011867202167
Application Methods
Brush, Roller
Coverage
Up to 10sq/m per litre
VOC level
High
Thinning
Do not thin
Touch dry
1-4 hours
Recoatable
1-4 hours
Scrubbability
Washable
Colour
White
Finish
Gloss
Cleanup
Hammerite Brush Cleaner & Thinners
Base
Oil
Age restriction
You must be 16 years or older to buy this product.
Trustpilot

Data Sheets

Additional Information

Surface Preparation

  • Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
  • Remove dirt, dust, and grease with diluted detergent. Rinse with clean water and allow time to dry.
  • Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
  • If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.
  • On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.


Application

  • Ideal application temperature = 8°C to 25°C.
  • Lightly stir before use. Do not mix vigorously. 


Brush Application

  • Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient.
  • On bare/rusty metal, 2 coats are required.
  • Ensure that all edges and corners are adequately covered.
  • Do not over-apply, as sagging will occur.


Cleaning and Storage

  • After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.
  • Do not use or store in extremes of temperature.


Coverage 

  • 5m²/L


Touch Dry

  • 1-2 Hours


Recoat

  • 4 hours


Related Products