Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Direct to Rust Metal Paint Smooth (Ready Mixed) 400ML - Red

Product Code: BG1510280QA
Loading ... Expand image

Direct to Rust Metal Paint Smooth (Ready Mixed) 400ML - Red

Product Code: BG1510280QA
Trustpilot

Fast drying, metal protecting, gloss finish for exterior use on rusty surfaces

* Colours on screen may vary from actual paint

£18.98 Inc VAT £15.82 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
3 working days
£18.98 Inc VAT £15.82 Exc VAT
Hammerite Direct to Rust Metal Paint is a high VOC content gloss finish. A washable product which cannot be thinned and is applied by brush or roller. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. 
Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat. Suitable for exterior use. Touch dry in 1-2 hours and recoatable after 4 hours. 
Size
400ML
Barcode
5011867221137
Application Methods
Aerosol
Coverage
Up to 10sq/m per litre
VOC level
High
Scrubbability
Washable
Colour
Red Aerosol
Finish
Gloss
Base
Oil
Age restriction
You must be 16 years or older to buy this product.
Trustpilot

Data Sheets

Additional Information

Hammerite Direct To Rust Metal Paint Smooth is specially formulated to perform as primer, undercoat and topcoat in one.

Surface preparation
  • Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
  • Remove dirt and dust with diluted detergent.
  • Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow to dry.
  • Spray a test patch of Hammerite Direct To Rust Metal Paint Smooth onto the painted surface and leave to dry for at least 1 hour. If there is no reaction apply Hammerite Direct To Rust Metal Paint Smooth directly to the surface. If there is a reaction, remove all paint from the surface.
  • On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct To Rust Metal Paint Smooth.

Application
  • Store aerosol at room temperature for two hours prior to use.
  • Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes.
  • Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving.
  • Do not concentrate spray on one spot.
  • Apply at least 3-4 coats for maximum protection.
  • Allow 15 minutes between coats.
  • Between coats invert can and spray for 2 seconds to avoid blockages.
  • Please note that this product is Not suitable for use on toys.

Storage  
  • Store in a dry well ventilated area and protect from frost and strong sunlight.

Related Products