Direct to Rust Metal Paint Satin Black (Ready Mixed) 2.5L

FREE next working day delivery available
£60.01 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Fast drying, metal protecting, gloss finish for exterior use on rusty surfaces.
Direct to Rust Metal Paint Satin Black (Ready Mixed)

In detail

Hammerite Direct to Rust Metal Paint Satin is a high VOC content satin finish. 

A washable product which should not be thinned. Suitable for exterior use. Touch dry in 1-2 hours and recoatable after 4 hours. 

Application Methods
Brush, Roller
Up to 5sq/m per litre 
VOC level
Hammerite Brush Cleaner & Thinners 
Touch dry
1-4 hours 
1-4 hours 
Suitable for...
Exterior use 
Colour type
Ready mixed 
Hammerite Brush Cleaner & Thinners 

* Colours on screen may vary from actual paint

Available colours

Hammerite Direct to Rust Metal Paint Satin Black (Ready Mixed) is available in 1 colours from the Hammerite Colour Cards.

    Browse colours


    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Direct to rust Easy to use
    Ultra tough Stops rust. 8 year corrosion protection. Excellent weather resistance

    Surface Preparation
    • Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
    • Remove dirt, dust, and grease with diluted detergent. Rinse with clean water and allow time to dry.
    • Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
    • If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.
    • On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.

    • Ideal application temperature = 8°C to 25°C.
    •  Lightly stir before use. Do not mix vigorously.

    Brush Application:
    • Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient.
    • On bare/rusty metal, 2 coats are required.
    • Ensure that all edges and corners are adequately covered.
    • Do not over-apply, as sagging will occur. Conventional Spray Application:
    • Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% thinners to paint.
    • Set spray gun at 25/35psi and use full fan spray at maximum volume.
    • Apply 4 thin coats. Allow 1 hour between coats.
    • Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers.

    Cleaning and Storage
    • After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.
    • Do not use or store in extremes of temperature.