Direct to Rust Metal Paint Satin White 750ML
BG151110P
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Fast drying, metal protecting, satin finish for exterior use on rusty surfaces.
Share...
In detail
Hammerite Direct to Rust Metal Paint Satin is a high VOC content satin finish.
A washable product which should not be thinned. Suitable for exterior use. Touch dry in 1-2 hours and recoatable after 4 hours.
- Size
- 750ML
- Application Methods
- Brush, Roller
- Coverage
- Up to 5sq/m per litre
- VOC level
- High
- Thinning
- Do not thin
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Scrubbability
- Washable
- Colour
- White
- Finish
- Satin
- Cleanup
- Hammerite Brush Cleaner & Thinners
- Base
- Oil
* Colours on screen may vary from actual paint
Additional information
Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one.
Surface Preparation
- Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
- Remove dirt, dust, and grease with diluted detergent. Rinse with clean water and allow time to dry.
- Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
- If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.
- On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
Application
- Ideal application temperature = 8°C to 25°C.
- Lightly stir before use. Do not mix vigorously.
Brush Application
- Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient.
- On bare/rusty metal, 2 coats are required.
- Ensure that all edges and corners are adequately covered.
- Do not over-apply, as sagging will occur. Step 3 - Cleaning and Storage
- After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.
- Do not use or store in extremes of temperature.
Coverage
5m²/L
Touch Dry
1 - 2 Hours
Re-Coat
4 Hours
